Wet-type magnetic separators have been frequently used in mines and concentrators. As the main magnetic separation equipment in the mining industry, wet-type magnetic separators, like ball mills and flotation machines, are the main components of mineral processing equipment. It has always been recommended by many customers. The main reason is due to the operating characteristics and wide applicability of the wet magnetic separator. Many people do not know what matters to pay attention to during the operation of the wet magnetic separator. Today, Xin Yide Machinery will take everyone to understand the matters needing attention during the operation of the wet magnetic separator. 

The wet magnetic separator can obtain a good beneficiation effect and recovery rate when sorting weak magnetic materials. The wet magnetic separator is a magnetic separation equipment that has received common praise in the separation of weak magnetic ore. The wet magnetic separator has solved the problem. Different magnetic ores are difficult to separate and form a great loss of useful concentrate resources, forming infinite power waste. The start-up of the wet magnetic separator should be carried out in a certain order. Generally speaking, the machine starts from the back to the front according to the skill process, and the opposite is the case when the machine is stopped; pay attention to the wear of the barrel, if the wear layer is worn or dropped, it should be repaired or replaced in time; the power line and transmission device should be checked before starting the machine , The smooth system and the surrounding conditions of the equipment are confirmed to be normal, and the machine can be turned on only after obstacles are clear; if there is any iron or debris in the tank, remove it in time when found; each smooth point must have satisfactory smooth grease. Electromagnetic speed regulating motor is used to supply power to ensure the service life of the motor and the mechanical transmission power; the speed of completing the ore separation is adjustable, and the multi-stage minerality can be separated. The thickness of the feed material does not exceed 1.5 times the larger particle size as the appropriate thickness, while the thickness of the other feed layer of the processing intermediate level is 4 times the larger particle size, and the fine level can reach 10 times the appropriate thickness. The operation of the magnetic separation process is to reduce the grade of tailings as much as possible while ensuring the quality of the concentrate. In this way, the operator should make accurate judgment and adjustment, and check and repair regularly. We also need to protect and maintain the magnetic separation equipment so that the equipment has a long service life.