There are many types of iron removal equipment. How should we choose the iron removal equipment that suits us? Let's take a look at how to choose the iron removal equipment that suits us:
At present, the iron remover equipment we use is mainly divided into electromagnetic and permanent magnets according to the excitation method. There are also many ways to discard iron with different iron separators. Some users lack a sufficient understanding of the performance of the iron separator equipment and the place of use, and it is easy to present an unreasonable situation in the selection.
In order to cater to the user's hobbies, individual consumer manufacturers often focus on the magnetic performance of the iron separator equipment and neglect the method of iron abandonment, so the application effect of the equipment in practical consumption is not good. As long as you fully understand the requirements for iron removal, the application site and the working environment conditions, you can choose the matching reasonably, and better display the performance of the iron remover equipment to achieve the ideal iron removal effect.
Under normal conditions of iron separator equipment, the single piece of ferromagnetic substance contained in the material does not exceed 1kg, and the width of the conveyor belt does not exceed 1000mm. In some cases, due to the limitation of the work site, some iron separator equipment also adopts the method of abandoning iron on site.
After a few hours of operating requirements, the separator should be shut down and the conveyor should be shut down. After a few seconds, the iron will fall onto the conveyor belt below. After picking it out manually, the job is completed. The iron remover of magnetoelectric consumption has high iron removal efficiency and relatively low fault rate.
Regarding the knowledge of how to choose iron removal equipment, we will share it here today. If you have a better choice of iron removal equipment, you may wish to share it with us.